Gold Series Metal Dice
De lyxiga Dice Trays i octagon-serien är sammetsfodrade och täckta av hårt PU-läder, och fungerar både som tärningsförvaring och två tärningsbrickor i ett.
Oktagonen mäter 23 cm i diameter och 4,5 cm hög (stängd).
De lyxiga Dice Trays i octagon-serien är sammetsfodrade och täckta av hårt PU-läder, och fungerar både som tärningsförvaring och två tärningsbrickor i ett.
Oktagonen mäter 23 cm i diameter och 4,5 cm hög (stängd).
Kraken Wargames playmats are made from neoprene like material of the highest available quality. Kraken Wargames has handpicked the facilities that are able to match the very high expectations when it comes the quality of the print at 300DPI and much more. All play mats are high resolution photographs of actual gaming tables built in Kraken Wargames secret laboratory. No computer generated graphics at Kraken Wargames and thus no crappy textures!
Kraken Wargames is proud to rock the most exact measurements of your future play mat production allows and the thickness is the best of both worlds: Durability and weight of the product. And they are 100% liquid repellent! No nasty stains on your shiny new gaming mat be it beer or coffee.
Size: 61 x 35cm
Kraken play mats were built as real plates and were photographed and digitally reworked
As a result, they achieve a much higher level of detail than any computer-generated graphics
This technique allows the sharpest details to be displayed with minimal repetition of textures
The mats are 2mm thick and have an anti-slip coating on the back
The storage is simple, the mats can be rolled easily without accepting the shape
They roll without problems wonderfully flat, again and again
The Lotus effect protects against moisture, spilled drinks and other dirt
The mats are scratch resistant
The print quality is 720dpi
The dice rolling is dampened by the material
The cards can be easily gathered from the play mat
The mats are made in Germany
Tärningspåse i svart sammet med 7 fickor på insidan, fodrad i lila sammet. Det finns en broderad trolldrycksflaska på framsidan och dekorativa dödskallar i metall i slutet av dragsnörena.
Mått: 17 x 11 cm (när påsen är stängd är den ca 31 cm bred).
Tärningsförvaringsetui i svart konstläder med guldtryck och dragkedja. Inuti den lilla väskan finns plats för 35 olika typer av tärningar eller andra speltillbehör i olika former.
Etuiet är ca 18 cm brett och 24 cm högt.
En liten tärningspåse i beige säckväv, med Lindorms logga i guldfärg tryckt på framsidan och snören för att dra åt påsen.
Tärningspåsen är ca 10 cm hög och 7,5 cm bred (rymmer ca 10 st vanliga d6:or).
Genomskinliga tärningar med slöjor i vitt och guld och med guldfärgade siffror.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Tärningar i röda och orangea toner med guldstänk och guldfärgade siffror.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Tärningar i svart och guld och med guldfärgade siffror.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Lätt genomskinliga tärningar i lila toner och guldskimmer, med siffror i guldfärg.
Tärningsset med 7 tärningar med siffror (d4, d6, d8, d10, d10special, d12, d20). D10special är en tiotalstärning med 10, 20, 30 etc.
Mega Civilization Standard Card Sleeves
Expertly crafted and engineered for use with all Mega Civilization cards sized 75x105mm.
Protect your expensive board games from wear and tear, dirt and grime, and accidental spills and other common game-play related mishaps! Don't let your cards get beat up, spilled on, marked up, or destroyed! Invest in some card protection while you still can!
Extra speltokens till Catan
https://www.maydaygames.com/collections/tokens/products/yucatan-token-set-premium
Are you tired of slowing your game down by having to deal out cards and organize them in your hand? Do you realize that if you play on Xbox Live that it tells you how many of each resource are out there among all the players? It gives you much better information and allows the game to play quicker!
Have you ever stepped back and realized your game play is really in two very different worlds? One world with cute wooden houses and cities, great roads winding among resources, spreading out inexorably toward the ocean? And then there is the world of a card game! The cards sort of ruin the experience by many accounts. We are changing all that by allowing your resource world to come into harmony with your game world. Announcing the Yucatan Token Set! Imagine for a moment rather than collecting cards on this beautiful miniature island that you were actually gathering the resources from the island?
Included in this set are 25 of each of 5 custom designed tokens: Sheep, Grain, Brick, Wood and Stone (Ore). You put a few of the tokens on each tile on the board! Put 5 brick on each brick tile, 5 stone on each stone tile, etc. Imagine an island resplendent with sheep-filled rolling hills, wheat-filled fields, dark wooden forests, brick-laden cliffs and ore-rich quarries! Pull the resources directly from the island and open up your playing world! You just put these tokens on the board and have everyone get their own production, speeding up distribution and trading! Dump the cards and play like real island settlers!
Yes this is the 5-6 player version with as many tokens (25) as you have cards in the game with the 5/6 player expansion!
FAQ
1) OK so this sounds cool but what about keeping your cards hidden? No problem at all, you just keep one hand over your tokens, or put a small folded blind up if you prefer. Instead of having a hand full of cards you keep a handful of tokens. Just keep a hand over your pieces or any object in front of your tokens. This is much much easier if you happen to be a brilliant 6 year old who is great at Catan and terrible at holding cards!
2) What about the robber, how do you have someone randomly select a resource for stealing when they can see what you have? Dealing with the robber is simple! Just put your tokens in your two hands, shake them up like you would dice and open one hand slightly until one random token falls out. Very easy! Tokens Only
Our Dead of Winter box insert holds all the cards for Dead of Winter along with player sheets, location cards, tokens, dice and all the standees. There is enough room in the card bays to configure them however you want - you can have a special bay just for Crossroads cards, and one bay for the item cards for each location - it is up to you. Also, with our Dead of Winter inserts, no assembly is required - installation is optional and takes less than 10 minutes.
Our Dead of Winter box insert holds all the components included in either Dead of Winter, OR Dead of Winter: The Long Night - they can even fit the cards and sleeves if you choose to sleeve them. There is room for more than just the base game though; if you choose to, you can combine the two games into one box to bring some of The Long Night's modules over to the base game. We don't recommend cramming everything from both boxes into one insert, but there is ample room to supplement cards, tokens, and survivors from both games in one insert. If you just have to have all the components from both games, however; it may be best to pick up a second insert.
The Dead of Winter inserts also feature "Standee Slots" around the perimeter of the insert. You can use the slots to place standees for quick access to survivors, additional zombies, special infected, or however else you choose.
Finally, similar to our Cosmic Encounter Insert, our Dead of Winter inserts come with adhesive on the bottom; a unique feature to Mini Foam Studio inserts that allows you to fix them to the bottom of your box. This is permanent, but makes the insert more firm and rigid should you prefer, and it will stay in place as you pack and unpack your game components. Alternatively, you can use the adhesive on a piece of cardboard, poster board, or other materials you choose. This will make the insert removable, but adds a little more time to the installation.
But of course, using the adhesive is completely optional; there is a liner covering the adhesive, so you don't have to use it if you don't want to.
https://www.minifoam.com/products/foam-insert-for-dead-of-winter-pre-order-only
50 Card Sleeves that will fit both your One Night and Werewords cards (cardboard tiles) perfectly! Printed on one side to cover any marks you might have accidentally made on them, these card sleeves will protect both your One Night and Werewords cards from any damage! Also designed to make them easy to pick up (the "seam" on the edges" is in the middle of the edge, providing a small area for gripping with your fingers). Compatible with One Night, Daybreak, Vampire, Alien, Bonus Pack 1, Bonus Pack 2, Bonus Pack 3, and Werewords.
https://beziergames.com/collections/one-night-ultimate-werewolf/products/one-night-card-sleeves
2mm ( 5/64") Radius Hand Held Round Corner Punch Cutter & Rounder Pliers
Heavy Duty hand held corner rounding tool with 2mm ( 5/64") radius. Weighs only 10.4 ounces & cuts up to approx 1/16" thick (70 mils) paper or laminated paper material.
FEATURES
All steel construction
Reverse angle nip style
Will punch up to 70 mils thick laminated paper
Rubber coated grips for comfort
http://www.oregonlam.com/CR2MM_2mm_3_32_Corner_Rounder_Cutter_Punch.html
Deluxe 2.5mm Corner Cutter Punch (3/32") Radius Heavy Duty Hand Held Rounder with Wide Side Guides
Heavy Duty hand held corner rounding tool with 2.5mm radius. Weighs under 14 ounces & cuts up to approx 5/64" thick (75 mils) paper, PVC cards or laminated paper material.
FEATURES
Has large steel cutting die
Weighs less than 14 ounces
Will punch up to 75 mils thick laminated paper or PVC cards
Has extra wide side guides for registration
http://www.oregonlam.com/C-006-2-5MM_2-5mm_Corner_Cutter_Punch_Rounder.html
Deluxe 2mm Corner Cutter ( 5/64" ) Radius Heavy Duty Hand Held Punch & Rounder with Wide Side Guides
Heavy Duty hand held corner rounding tool with 2mm radius. Weighs under 14 ounces & cuts up to approx 5/64" thick (75 mils) paper, PVC cards or laminated paper material.
FEATURES
Has large steel cutting die
Weighs less than 14 ounces
Will punch up to 75 mils thick laminated paper or PVC cards
Has extra wide side guides for registration
http://www.oregonlam.com/C-006-2MM_2mm_Corner_Cutter_Punch_Rounder.html
Playing pieces: 25 x 12 mm, birch wood, red / green / blue / yellow, 4 pcs. from each.
Dice: 16mm, birch wood, natural colors, 2 pcs.
In plastic bag.
Plano 3500
- Antal fack 5-9st
- Mått 230x120x30mm
- Färg klar
Plano 3700 förvaringsask.
Ca 35,5 x 21,5 x 4,7 cm.
Lådan innehåller 4 avlånga fack som sedan kan delas in i mindre fack med de 20 avdelningsväggarna som medföljer. Dessa kan stoppas i något/några av de 42 möjliga avdelningar som finns så att man får mellan 4 och 24 fack att lägga saker i. Om man har fler än de 20 avdelningsväggarna som medföljer skulle man altså kunna få fler fack om man vill.
Each PolyHero Wizard 8 Dice Set comes with 8 dice: D4 Bolt, D6 Fireball, D8 Scroll, 2 D10 Potions, D12 Wand, and 2 D20 Orbs
100 Plastfickor som passar kort som är 41 x 63 mm.
Bricka för utformad för Star Wars X-wing från Bandua.
Ordning och reda på spelbordet!
Pack med tre Rebels brickor.
Universalpenna som fäster på de flesta ytor som textil, glas, plast, sten, kartong, trä, papper, metall, läder mm. Rund spets. Vattenlöslig. Denna penna är icke-permanent och kan torkas bort från de flesta blanka ytor, såsom overheadfilm, glas etc.
4-pack med röd, blå, grön och svart penna med Medium-spets. Skrivbredd: 1,0 mm.
Prisad förpackningsdesign där locket kan vikas för att skapa ett praktiskt pennställ.
Universalpenna som fäster på de flesta ytor som textil, glas, plast, sten, kartong, trä, papper, metall, läder mm. Rund spets. Vattenlöslig. Denna penna är icke-permanent och kan således torkas bort från de flesta blanka ytor, såsom overheadfilm, glas etc.
Medium-spets. Skrivbredd: 1,0 mm.
En låda att förvara komponenter i.
Lådans yttre mått är ca 20,5 x 12 x 4,5 cm.
Lådan har 3 avlånga fack på ca 20 x 4 cm med djup 4 cm.
Varje fack har 6 st skåror så att man kan dela av det med dividers.
Det följer med 9 st blå dividers.
En låda att förvara komponenter i.
Lådans yttre mått är ca 20,5 x 12 x 3,2 cm.
Lådan har 3 avlånga fack på ca 20 x 4 cm med djup 3 cm.
Varje fack har 7 st skåror så att man kan dela av det med dividers.
Det följer med 10 st gröna eller röda dividers.
En låda att förvara komponenter i.
Lådans yttre mått är ca 20,5 x 12 x 3,2 cm.
Lådan har 3 avlånga fack på ca 20 x 4 cm med djup 3 cm.
Varje fack har 7 st skåror så att man kan dela av det med dividers.
Det följer med 10 st röda dividers.
En låda att förvara komponenter i.
Lådans yttre mått är ca 16,5 x 10 x 3,2 cm.
Lådan har 3 avlånga fack på ca 16 x 3 cm med djup 3 cm.
Varje fack har 4 st skåror så att man kan dela av det med dividers.
Det följer med 11 st grå dividers.
Om du har några frågor eller funderingar är det bara att höra av dig till oss.
E-post: info@worldofboardgames.comOrdrar med varor vi har i lager, och som kommer in innan 12:00 på vardagar, skickas normalt samma dag och har sedan en leveranstid på 1-3 dagar.
Fraktkostnaden är 49 kr med Schenker - Ombud, 75 kr med Postnord - Ombud och 175 kr för hemleverans med Postnord. Företagspaket kostar 99 kr. Du ser din fraktkostnad när du går till kassan. Vid beställningar för minst 2000 kr ger vi fri frakt, gäller dock endast Schenker - Ombud och för privatpersoner.